information-circle
20% OFF

Fiber Accessories

Sort By:

11 Results Go to page

  • You're currently reading page

    • of 2

    • Screenshot 2025-11-19 180245.png
      FS-MD-FLD-RPR-KIT View Product Info
      FS-MD-FLD-RPR-KIT
      WMFS-MD-FLD-RPR-KIT
      SKU: WMFS-MD-FLD-RPR-KIT
      There are many situations where two microducts need to be coupled together to continue the conduit pathway. Regardless of whether the microduct was cut after initial installation or if the duct pathway simply needs to be continued, the FieldShield Microduct Repair Kit provides all the components to properly couple two microducts. For toneable duct, the kit includes components to ensure tone wire circuit integrity for ground locating.
      0 EA
      OUT OF STOCK
      Quantity must be a multiple of 1.
      The minimum order quantity for this item is 1.
      Minimum: 1 Multiple: 1
      TOTAL
      Requires Quote
    • FS-TCUT-8-10MM
      FS-TCUT-8-10MM View Product Info
      FS-TCUT-8-10MM
      WMFS-TCUT-8-10MM
      SKU: WMFS-TCUT-8-10MM
      Rotary Fiber Tube Cutter are designed to strip away the outer jacket from FieldShield Optical Fiber without damaging the fibers inside.
      0 EA
      OUT OF STOCK
      Quantity must be a multiple of 1.
      The minimum order quantity for this item is 1.
      Minimum: 1 Multiple: 1
      TOTAL
      Requires Quote
    • fieldshield-duct-accessories-end-cap (1).png
      FS-END-STP-10MM-10 View Product Info
      FS-END-STP-10MM-10
      WMFS-END-STP-10MM-10
      SKU: WMFS-END-STP-10MM-10
      End caps are airtight caps used to keep debris out of the end of the microduct when pulling duct through existing conduit and plowed holes, sealing the end of the conduit temporarily. The end cap is a clear cap that installs much like the couplers providing an airtight seal.
      0 EA
      OUT OF STOCK
      Quantity must be a multiple of 1.
      The minimum order quantity for this item is 1.
      Minimum: 1 Multiple: 1
      TOTAL
      Requires Quote
    • Rotary Fiber Tube Cutter.png
      FS-TCUT-3-4MM View Product Info
      FS-TCUT-3-4MM
      WMFS-TCUT-3-4MM
      SKU: WMFS-TCUT-3-4MM
      Rotary Fiber Tube Cutter are designed to strip away the outer jacket from FieldShield Optical Fiber without damaging the fibers inside.
      0 EA
      OUT OF STOCK
      Quantity must be a multiple of 1.
      The minimum order quantity for this item is 1.
      Minimum: 1 Multiple: 1
      TOTAL
      Requires Quote
    • fieldshield-duct-accessories-airtight-coupler (2).png
      FS-CPLR-10MM-10MM-10 View Product Info
      FS-CPLR-10MM-10MM-10
      WMFS-CPLR-10MM-10MM-10
      SKU: WMFS-CPLR-10MM-10MM-10
      Airtight Couplers are designed to provide simple, 2-click plug-and-play joining of microducts, enabling longer runs and safe pushing and pulling performance.
      0 EA
      OUT OF STOCK
      Quantity must be a multiple of 1.
      The minimum order quantity for this item is 1.
      Minimum: 1 Multiple: 1
      TOTAL
      Requires Quote
    • fieldshield-duct-accessories-airtight-coupler (2).png
      FS-CPLR-8MM-8MM-10 View Product Info
      FS-CPLR-8MM-8MM-10
      WMFS-CPLR-8MM-8MM-10
      SKU: WMFS-CPLR-8MM-8MM-10
      Airtight Couplers are designed to provide simple, 2-click plug-and-play joining of microducts, enabling longer runs and safe pushing and pulling performance.
      0 EA
      OUT OF STOCK
      Quantity must be a multiple of 1.
      The minimum order quantity for this item is 1.
      Minimum: 1 Multiple: 1
      TOTAL
      Requires Quote
    • Screenshot 2025-11-19 180816.png
      FS-CPLR-8MM-10MM-10 View Product Info
      FS-CPLR-8MM-10MM-10
      WMFS-CPLR-8MM-10MM-10
      SKU: WMFS-CPLR-8MM-10MM-10
      Airtight Transition Couplers are used to join two different sizes of microduct
      0 EA
      OUT OF STOCK
      Quantity must be a multiple of 1.
      The minimum order quantity for this item is 1.
      Minimum: 1 Multiple: 1
      TOTAL
      Requires Quote
    • fs-fiber-accessories-pull-sock (1).jpg
      FS-PUL-3-4MM View Product Info
      FS-PUL-3-4MM
      WMFS-PUL-3-4MM
      SKU: WMFS-PUL-3-4MM
      The FieldShield Pull Sock provides a pulling eye to install pre-terminated SC pushable assemblies and blunt drops using the integrated pull string that comes standard in all FieldShield Microducts. The pull sock grips the outer jacket of FieldShield Optical Cables by compressing while under tension.
      0 EA
      OUT OF STOCK
      Quantity must be a multiple of 1.
      The minimum order quantity for this item is 1.
      Minimum: 1 Multiple: 1
      TOTAL
      Requires Quote
    • Micro-Duct De-burring tool.png
      FS-MD-DBR-TOOL View Product Info
      FS-MD-DBR-TOOL
      WMFS-MD-DBR-TOOL
      SKU: WMFS-MD-DBR-TOOL
      Microduct De-Burring Tools are designed to make chamfering the inside of microducts simple, helping to ensure pushing and pulling are smooth operations. It is used after a cut has been made to the microduct and prior to inserting a cut microduct into a coupler. The purpose of the de-burring tool is to form a conical shape on the inside surface of the microduct that, after insertion into a coupler, allows the fiber to glide between microducts with ease.
      0 EA
      OUT OF STOCK
      Quantity must be a multiple of 1.
      The minimum order quantity for this item is 1.
      Minimum: 1 Multiple: 1
      TOTAL
      Requires Quote
    • Duct Cutter.png
      FS-DCUT-8-10MM View Product Info
      FS-DCUT-8-10MM
      WMFS-DCUT-8-10MM
      SKU: WMFS-DCUT-8-10MM
      Rotary Duct Cutters are designed to make cutting all standard microducts as simple as possible without cutting the pull string inside.
      0 EA
      OUT OF STOCK
      Quantity must be a multiple of 1.
      The minimum order quantity for this item is 1.
      Minimum: 1 Multiple: 1
      TOTAL
      Requires Quote

    11 Results Go to page

  • You're currently reading page

    • of 2